Search Results for "quick-changeover-for-operators-the-smed-system-the-shopfloor-series-volume-3"

Quick Changeover for Operators

Quick Changeover for Operators

The SMED System

  • Author: Productivity Press. Development Team,Shigeo Shingo
  • Publisher: SteinerBooks
  • ISBN: 9781563271250
  • Category: Business & Economics
  • Page: 77
  • View: 6500
DOWNLOAD NOW »
Changeover is the process of setting up a production line for a different process or product. Many plants take hours or even days to do a changeover - a major barrier to manufacturing flexibility. Quick Changeover for Operators, based on Shigeo Shingo's SMED system, teaches frontline employees the techniques and approaches that turn hours of changeover time into minutes, even seconds! Now the learning format in the Shopfloor Series makes these powerful techniques accessible to the whole workforce. SMED is short for "Single-Minute Exchange of Die." The "single" here means a single-digit number of minutes - less than ten. The SMED approach is simple and universal. It works in companies all over the world. Although it was first used in (and named for) manufacturing with dies, the basic principles of SMED have been used to reduce setup and turnaround time in all types of manufacturing, assembly, and even service industries, from process and packaging plants to airlines.

Quick Changeover for Operators

Quick Changeover for Operators

The SMED System

  • Author: Shigeo Shingo
  • Publisher: Productivity Press
  • ISBN: 9781563271250
  • Category: Business & Economics
  • Page: 96
  • View: 4632
DOWNLOAD NOW »
The powerful knowledge contained in this book can make your workplace more productive, your job simpler, and everything more satisfying. It's about how to do equipment or product changeovers in record time--often in less than 10 minutes. The method you'll learn here is called SMED, short for "Single-Minute Exchange of Die" (the "single" here means a single-digit number of minutes). Developed from a longer book, A Revolution in Manufacturing: The SMED System (cat no. PP9903), written for managers, this book is written for frontline production and assembly associates. It presents an overview of the reasons why SMED is important for companies and employees, sets out the three basic stages of SMED, and then devotes a separate chapter to each of these stages. The first chapter of the book is like an "owner's manual" that tells you how to get the most out of your reading time by using the margin assists, summaries, and other features of the book to help pull out exactly what you need. One of the most effective ways to use this book is to read and discuss it with other employees. The authors planned the book so that it can be used this way, organizing the book into chunks of information that can be covered in a series of short sessions. Each chapter includes reflection questions to stimulate group discussion. A Learning Package is also available (catalog no.PP7126), which includes a leader's guide, overhead transparencies to summarize major points, and color slides showing examples of SMED applications in different kinds of companies.

A Study of the Toyota Production System

A Study of the Toyota Production System

From an Industrial Engineering Viewpoint

  • Author: Shigeo Shingo,Andrew P. Dillon
  • Publisher: CRC Press
  • ISBN: 9780915299171
  • Category: Business & Economics
  • Page: 296
  • View: 2749
DOWNLOAD NOW »
This is the "green book" that started it all -- the first book in English on JIT, written from the engineer's viewpoint. When Omark Industries bought 500 copies and studied it companywide, Omark became the American pioneer in JIT. Here is Dr. Shingo's classic industrial engineering rationale for the priority of process-based over operational improvements in manufacturing. He explains the basic mechanisms of the Toyota production system, examines production as a functional network of processes and operations, and then discusses the mechanism necessary to make JIT possible in any manufacturing plant. Provides original source material on Just-ln-Time Demonstrates new ways to think about profit, inventory, waste, and productivity Explains the principles of leveling, standard work procedures, multi-machine handling, supplier relations, and much more If you are a serious student of manufacturing, you will benefit greatly from reading this primary resource on the powerful fundamentals of JIT.

Kaizen for Quick Changeover

Kaizen for Quick Changeover

Going Beyond SMED

  • Author: Keisuke Arai,Kenichi Sekine
  • Publisher: CRC Press
  • ISBN: 9780915299386
  • Category: Business & Economics
  • Page: 320
  • View: 6976
DOWNLOAD NOW »
Changeovers in 3 minutes or less! That is the result of the process described in this book. Picking up where Dr. Shingo's Single Minute Exchange of Die left off, it streamlines the process even further to reduce changeover time and cut staffing requirements in half simultaneously! The book describes how to achieve quick changeover in virtually any type of production environment with: A succinct 8-step process for setup improvement. 9 basic principles for eliminating changeover waste. The book first outlines the tactical principles for improving the three phases of the changeover procedure. Next you'll learn how to improve changeover on a processing line. All of the ideas presented are based on kaizen improvements that require very little, if any, expenditure. Process razing and the implementation of one-piece flow are also examined as means for eliminating wasteful transportation and searching.

Toyota Production System

Toyota Production System

Beyond Large-Scale Production

  • Author: Taiichi Ōno
  • Publisher: Productivity Press
  • ISBN: 9780915299140
  • Category: Business & Economics
  • Page: 143
  • View: 375
DOWNLOAD NOW »
In this classic text, the inventor of the Toyota Production System and lean manufacturing combines his candid insights with a rigorous analysis of Toyota's attempts at lean production to explain how lean principles can improve any production-oriented endeavor.

A Revolution in Manufacturing

A Revolution in Manufacturing

The SMED System

  • Author: Shigeo Shingo
  • Publisher: Productivity Press
  • ISBN: 9780915299034
  • Category: Business & Economics
  • Page: 361
  • View: 4476
DOWNLOAD NOW »
"Dr. Shingo, inventor of the Single-Minute Exchange of Die (SMED) system for Toyota, shows you how to reduce your changeovers by an average of 98 percent! By applying Shingo's techniques, you'll see rapid improvements (lead time reduced from weeks to days, lower inventory and warehousing costs) that will improve quality, productivity, and profits." - product description.

Non-Stock Production

Non-Stock Production

The Shingo System of Continuous Improvement

  • Author: Shigeo Shingo
  • Publisher: CRC Press
  • ISBN: 9780915299300
  • Category: Business & Economics
  • Page: 479
  • View: 6284
DOWNLOAD NOW »
Shingo, whose work at Toyota provided the foundation for JIT, teaches how to implement non-stock production in your JIT manufacturing operations. The culmination of his extensive writings on efficient production management and continuous improvement, this book is an essential companion volume to his other landmark books on key elements of JIT, including SMED and poka-yoke. It includes: Fundamental flaws in European and American production philosophies. Basic concepts for improving production systems. The "scientific thinking mechanism" -- a new approach to improvement. Implementing a production method in an age of authorized stock production. Development of production functions in the age of non-stock production. Significance of the different production systems.

American Book Publishing Record

American Book Publishing Record

  • Author: N.A
  • Publisher: N.A
  • ISBN: N.A
  • Category: American literature
  • Page: N.A
  • View: 4402
DOWNLOAD NOW »

Forthcoming Books

Forthcoming Books

  • Author: Rose Arny
  • Publisher: N.A
  • ISBN: N.A
  • Category: American literature
  • Page: N.A
  • View: 4687
DOWNLOAD NOW »